For use with Digitrax Decoders Equipped with 6 pin Function Harness

8 ohm 16 x 26 x 9 mm box speaker included

Keeps locos running during intermittent power interruptions resulting from dirty or bad track.

0.33 F Capacitance

Use on 10-18V Track Power

Hold up time varies based on actual decoder load & track conditions.

For use with Digitrax 1 Amp Series 6 decoders.

Plug N’ Play installation with no CV configuration required.

The PX108 series power extender offers the same great features of other Digitrax Power extenders. The PX108 is offered in a shorter package while still providing approximately 70% of the holdup of the larger PX112. Additionally, the PX108 is operational at a wider range of voltages, from 10v to 18v. The PX108 measures 1.007” x 0.492” x 0.299” (25.6mm x 12.5mm x 7.6mm) excluding the harness.