The E24 adapter board is suitable if you want to digitize a very small locomotive without a digital interface using the LokSound 5 Nano. With dimensions of only 19.6 mm x 8.5 mm, the board is exactly the same size as the decoder itself and therefore only increases the thickness as a “sandwich”. Already soldered connection wires with a length of approx. 88 mm for power pickup, motor and speaker as well as U+, the two light outputs and AUX1, AUX2, AUX5 ensure easy handling and wiring. Soldering pads are available for AUX3, AUX7 and AUX8.