Fits E24 plug N locomotives and compatible units
Plug-in E24 socket
Motor drive at connector capacity
13 FX7 Functions, 200mA capacity
8 CV Selectable Steam & Diesel Sound Schemes Included


Digitrax SoundFX®v3 Sound System
Your locomotives will sound “in scale” like the real thing with SoundFX v3
Customizable with 16, 12 or 8 bit .wav file sounds
Works with all SoundFX 8 and 16 bit sound projects
Up to 6 simultaneous voices
Download sound projects and sounds with a USB Digitrax Sound Programmer and free Digitrax SoundLoader II app
16 megabit On Board Sound Memory
Scalable Speed Stabilization configured for sound operation


Features:
- 24-Pin E24 Plug for all; track, motor, speaker and function connections, allows decoder to be moved between different locomotives
- Series 7 Enhanced Decoder Features
- Firmware may be user updated using a Digitrax USB equipped Command Station with Sound Loader software in decoder IPL mode.
- Digitrax FX7 Functions-Control lights and functions for prototypical lighting effects and on/off control.
- SoundFX v3 does not require an external rate sensor to vary workload
- Smart Power Management - no more booster or programmer shutdowns!
- Configurable FX7 Pulse Function available on all function outputs
- Digitrax LocoMotion® System – Lets your trains run like the real thing!
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & UniVersal Consisting.
- SuperSonic motor drive for silent operation
- Direct and Operations Mode programming.
- Decoder Reset by CV8, with or without speed table reset.
- Transponder Equipped ready for transponding ID on your layout.
- Power-on Motor Isolation Protection, helps prevent damage to your decoder.
- Operates on DCC track voltage 9V minimum to 22V maximum.